D-Link DIS-200G Emulator - Page 138
Surveillance VLAN Settings, VLAN ID, Apply, IP Settings, Get IP From, IP Address, Gateway
![]() |
View all D-Link DIS-200G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch The fields that can be configured in the Surveillance VLAN Settings section are described below: Parameter VLAN ID Description Enter the ID of the surveillance VLAN here. The range is from 2 to 4094. Click the Apply button to accept the changes made. The fields that can be configured in the IP Settings section are described below: Parameter Get IP From IP Address Mask Gateway Description Select the method used to configure the IP address settings on the Switch here. Options to choose from are: Static - Specifies that the IP address settings will be manually configured. DHCP - Specifies that the IP address settings will be automatically obtained from a DHCP server on the network. Enter the IPv4 address of the Switch here. Enter the IPv4 subnet mask of the Switch here. Enter the IPv4 address of the default gateway here. Click the Apply button to accept the changes made. The fields that can be configured in the SNMP Host Settings section are described below: Parameter Host IPv4 Address Description Enter the IPv4 address of the SNMP host here. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. The fields that can be configured in the Log Server section are described below: Parameter Server IP Description Enter the IPv4 address of the log server here. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. The uplink ports join all surveillance VLANs since they forward surveillance traffic to other switches. It is recommended to connect uplink ports to the other switches because the discovery process is disabled on these ports. 127
![](/manual_guide/products/dlink-dis200g-emulator-0b5b57c/138.png)