D-Link DIS-200G Emulator - Page 89
IGMP Snooping Groups Settings, L2 Features > L2 Multicast Control > IGMP Snooping > IGMP
View all D-Link DIS-200G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch The fields that can be configured for VLAN Querier Status Settings are described below: Parameter Description VID Enter a VLAN ID from 1 to 4094, and select to enable or disable IGMP snooping querier on the VLAN. Click the Apply button to accept the changes made. The fields that can be configured for VLAN Fast Leave Settings are described below: Parameter VID Description Enter a VLAN ID from 1 to 4094, and select to enable or disable IGMP snooping fast leave on the VLAN. Click the Apply button to accept the changes made. IGMP Snooping Groups Settings This window is used to configure and view the IGMP snooping static group, and view IGMP snooping group. To view the following window, click L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping Groups Settings, as shown below: Figure 6-52 IGMP Snooping Groups Settings The fields that can be configured for IGMP Snooping Static Groups Settings are described below: Parameter VID Group Address From Port / To Port Description Enter a VLAN ID of the multicast group. Enter an IP multicast group address. Select the appropriate port range used for the configuration here. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. 82