D-Link DIS-200G Emulator - Page 22

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Take effect after the next boot Specify this radio button to restore and overwrite the start-up (startup-config) configuration file on the Switch. Click the Restore button to initiate the configuration restore. Configuration Backup to HTTP This window is used to initiate a configuration file backup to a local PC using HTTP. To view the following window, click Tools > Configuration Restore & Backup > Configuration Backup to HTTP, as shown below: Figure 3-9 Configuration Backup to HTTP window The fields that can be configured are described below: Parameter Include Username Password Description Specify this radio button to back up the running configuration file include username password from the Switch. Exclude Username Password Specify this radio button to back up the running configuration file exclude username password from the Switch. Click the Backup button to initiate the configuration file backup. Configuration Backup to TFTP This window is used to initiate a configuration file backup to a TFTP server. To view the following window, click Tools > Configuration Restore & Backup > Configuration Backup to TFTP, as shown below: Figure 3-10 Configuration Backup to TFTP window The fields that can be configured are described below: Parameter TFTP Server IP Destination File Description Enter the TFTP server's IPv4 address here. Enter the destination filename and path where the configuration file should be stored on the TFTP server. This field can be up to 64 characters long. Click the Backup button to initiate the configuration file backup. 15