D-Link DIS-200G Emulator - Page 80
ERPS (G.8032), ERPS, L2 Features > ERPS G.8032 > ERPS, Ring Name, Apply, Edit Ring, Show Detail
View all D-Link DIS-200G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch ERPS (G.8032) ERPS This window is used to view and configure Ethernet Ring Protection Switching (ERPS) settings. To view the following window, click L2 Features > ERPS (G.8032) > ERPS, as shown below: Figure 6-40 ERPS window The fields that can be configured are described below: Parameter Ring Name Description Enter the Ethernet Ring Protection (ERP) instance's name here. This name can be up to 32 characters long. Click the Apply button to create an ITU-T G.8032 ERP physical ring. Click the Edit Ring button to modify an ITU-T G.8032 ERP physical ring. Click the Show Detail button to view the ITU-T G.8032 ERP physical ring's status information. Click the Delete button to delete the specified ITU-T G.8032 ERP physical ring. After click the Edit Ring button, the following window will appear. Figure 6-41 ERPS (Edit Ring) window The fields that can be configured are described below: Parameter Instance ID Port0 Port1 Description Select the checkbox and enter the ERP instance number here. This value must be between 1 and 32. Select the Specify radio button to configure this parameter as per normal. Select the None radio button to revert this parameter to the default setting. Select the checkbox and then select the switch's unit ID and the port number that will be the first ring port of the physical ring. Select the Specify radio button to configure this parameter as per normal. Select the None radio button to revert this parameter to the default setting. Select the checkbox and then select the switch's unit ID and the port number that will be the second ring port of the physical ring. Select the None option, from the drop-down menu, specifies that the inter- connected node is a local node endpoint of an open ring. 73