D-Link DIS-200G Emulator - Page 44
SNMP Community Table Settings, Management > SNMP > SNMP Community Table Settings, Community Name
![]() |
View all D-Link DIS-200G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch SNMP Community Table Settings This window is used to create an SNMP community string to define the relationship between the SNMP manager and an agent. The community string acts like a password to permit access to the agent on the Switch. The characteristics can be associated with the community string: Read/write or read-only level permission for the MIB objects accessible to the SNMP community. To view the following window, click Management > SNMP > SNMP Community Table Settings, as shown below: Figure 5-5 SNMP Community Table Settings window The fields that can be configured are described below: Parameter Community Name View Name Access Right Description Enter an alphanumeric string of up to 32 characters that is used to identify members of an SNMP community. This string is used like a password to give remote SNMP managers access to MIB objects in the Switch's SNMP agent. Enter an alphanumeric string of up to 32 characters that is used to identify the group of MIB objects that a remote SNMP manager is allowed to access on the Switch. The view name must exist in the SNMP View Table. Select the access right here. Options to choose from are Read Only, and Read Write. Read Only - SNMP community members using the community string created can only read the contents of the MIBs on the Switch. Read Write - SNMP community members using the community string created can read from, and write to the contents of the MIBs on the Switch. Click the Add button to add a new entry based on the information entered. Click the Clear button to remove the specified entry. 37
![](/manual_guide/products/dlink-dis200g-emulator-0b5b57c/44.png)