D-Link DIS-200G Emulator - Page 127
network device, PD Alive State, PD IP Address, Action, Reset, Notify, Ping Test, Apply, Set to Default
View all D-Link DIS-200G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch After hovering (with the mouse pointer) over the network device icon, the following additional information will be displayed: Figure 12-3 Additional Device Information After clicking (left-click) the network device icon, the following window will appear. Figure 12-4 PD Alive Configuration window The fields that can be configured are described below: Parameter PD Alive State PD IP Address Action Description Select to enable or disable the PD Alive function here. Enter the IP address of the PD here. Select the action that will be taken here. Options to choose from are Reset, Notify, and Both. Reset - Specifies to reset the PoE port state (turn PoE off and on). Notify - Specifies to send logs and traps to notify the administrator. Both - Specifies to send logs and traps to notify the administrator and to reset the PoE port state (turn PoE off and on). Click the Ping Test button to initiate the ping test to check if the PD is active or not. Click the Apply button to accept the changes made. Click the Set to Default button to return the settings to the default settings for this PD. Click the Cancel button to discard the changes made. 116