D-Link DIS-200G Emulator - Page 134
PoE Scheduling, PoE ON, Searching, Delivering, Power Denied, Health Diagnostic, Time Range
![]() |
View all D-Link DIS-200G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch This displays the number of PoE devices connected to the Switch that is using 15 Watts of power per port. This displays the number of PoE devices connected to the Switch that is using 30 Watts of power per port. This displays the Ethernet port number on the Switch. This displays the PoE state on the port. This can be either PoE ON or PoE OFF. This displays the maximum PoE budget available on this port. This displays the current PoE status on the port. This status can be one of the following: -, Searching, Delivering, or Power Denied. When the Power Denied message is displayed, click on the link to redirect the Health Diagnostic window for more information. This displays the PoE consumption and power class of the PD connected to the port. PoE Scheduling This window is used to display and configure the PoE scheduling settings. To view the following window, click PoE Scheduling, as shown below: Figure 12-12 PoE Scheduling window The fields that can be configured in the Time Range section are described below: 123
![](/manual_guide/products/dlink-dis200g-emulator-0b5b57c/134.png)