D-Link DIS-200G Emulator - Page 21
Configuration Restore & Backup
![]() |
View all D-Link DIS-200G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Configuration Restore & Backup Configuration Restore from HTTP This window is used to initiate a configuration restore from a local PC using HTTP. To view the following window, click Tools > Configuration Restore & Backup > Configuration Restore from HTTP, as shown below: Figure 3-7 Configuration Restore from HTTP window The fields that can be configured are described below: Parameter Source File Effective immediately(running-config) Take effect after the next boot (startup-config) Description Click the Browse button to navigate to the location of the configuration file located on the local PC. Specify this radio button to restore and overwrite the running configuration file on the Switch. Specify this radio button to restore and overwrite the start-up configuration file on the Switch. Click the Restore button to initiate the configuration restore. Configuration Restore from TFTP This window is used to initiate a configuration restore from a TFTP server. To view the following window, click Tools > Configuration Restore & Backup > Configuration Restore from TFTP, as shown below: Figure 3-8 Configuration Restore from TFTP window The fields that can be configured are described below: Parameter Unit TFTP Server IP Source File Effective immediately (running-config) Description Select the switch unit that will be used for this configuration here. Enter the TFTP server's IPv4 address here. Enter the source filename and path of the configuration file located on the TFTP server here. This field can be up to 64 characters long. Specify this radio button to restore and overwrite the running configuration file on the Switch. 14
![](/manual_guide/products/dlink-dis200g-emulator-0b5b57c/21.png)