D-Link DIS-200G Emulator - Page 119
DDM Status Table, Action, Delete, Low Alarm, Low Warning, High Alarm, High Warning, Power Unit, Value
![]() |
View all D-Link DIS-200G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch The fields that can be configured are described below: Parameter Port Action Type Power Unit Value Description Select the port used for the configuration here. Select the action that will be taken here. Options to choose from are Add and Delete. Select the type of TX power threshold. Options to choose from are Low Alarm, Low Warning, High Alarm, and High Warning. Select the power unit here. Options to choose from are mW and dBm. Enter the threshold value. When selecting mW in the Power Unit drop-down list, this value must be between 0 and 6.5535. When selecting dBm in the Power Unit drop-down list, this value must be between -40 and 8.1647. Click the Apply button to accept the changes made. DDM Status Table This window is used to display the current operating digital diagnostic monitoring parameters and their values on the SFP module for specified ports. To view the following window, click OAM > DDM > DDM Status Table, as show below: Figure 9-8 DDM Status Table window 109
![](/manual_guide/products/dlink-dis200g-emulator-0b5b57c/119.png)