D-Link DIS-200G Emulator - Page 29
From Port / To Port, State, Normal, Cross, Flow Control, Duplex, Speed, Description, Apply
![]() |
View all D-Link DIS-200G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch Parameter From Port / To Port State MDIX Flow Control Duplex Description Select the appropriate port range used for the configuration here. Select this option to enable or disable the physical port here. Select the Medium Dependent Interface Crossover (MDIX) option here. Options to choose from are Auto, Normal, and Cross. Auto - Select this option for auto-sensing of the optimal type of cabling. Normal - Select this option for normal cabling. If this option is selected, the port is in the MDIX mode and can be connected to a PC's NIC using a straight-through cable or a port (in the MDIX mode) on another switch through a cross-over cable. Cross - Select this option for cross cabling. If this option is selected, the port is in the MDI mode and can be connected to a port (in the MDIX mode) on another switch through a straight cable. Select to either turn flow control On or Off here. Ports configured for full-duplex use 802.3x flow control, half-duplex ports use backpressure flow control, and Auto ports use an automatic selection of the two. Select the duplex mode used here. Options to choose from are Auto, Half, and Full. Speed Select the port speed option here. This option will manually force the connected on the selected port to only connect at the speed specified here. Options to choose from are Auto, 10M, 100M, 1000M. Description Enter a 64 characters description for the corresponding port here. Click the Apply button to accept the changes made. 22
![](/manual_guide/products/dlink-dis200g-emulator-0b5b57c/29.png)