Dell PowerEdge MX750c EMC Installation and Service Manual - Page 20
Error messages, Table 5. Configuration validation error continued, Table 6. Error message HWC8010
![]() |
View all Dell PowerEdge MX750c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Table 5. Configuration validation error (continued) Error Description Possible cause and recommendations Example Comm Error A configuration element is not responding to iDRAC using the management interface while running an inventory check. System management sideband communication Unplug AC Power, reseat the element and replace the element if the problem persists. Comm Error: Backplane 2 Error messages This section describes the error messages displayed on the screen during POST or captured in the system event log (SEL)/ LifeCycle (LC) log. Table 6. Error message HWC8010 Error code HWC8010 Message The System Configuration Check operation resulted in the following issue involving the indicated component type Arguments Riser, floating card (adapter PERC or BOSS), backplane, processor, cable, or other components Detailed Description The issue identified in the message is observed in the System Configuration Check operation. Recommended Response Action Do the following and retry the operation: 1. Disconnect the input power. 2. Check for proper cable connection and component placement. If the issue persists, contact the service provider. Category System Health (HWC = Hardware Config) Severity Critical Trap/EventID 2329 Table 7. Error message HWC8011 Error code HWC8011 Message The System Configuration Check operation resulted in multiple issues involving the indicated component type Arguments Riser, floating card (adapter PERC or BOSS), backplane, processor, cable, or other components Detailed Description Multiple issues are observed in the System Configuration Check operation. Recommended Response Action Do the following and retry the operation: 1. Disconnect the input power. 2. Check for proper cable connection and component placement. If the issue persists, contact the service provider. Category System Health (HWC = Hardware Config) Severity Critical 20 Minimum to POST and system management configuration validation
![](/manual_guide/products/dell-poweredge-mx750c-emc-installation-service-manual-ea74fc2/20.png)