Dell PowerEdge MX750c EMC Installation and Service Manual - Page 29
Air shroud, Removing the air shroud
![]() |
View all Dell PowerEdge MX750c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Air shroud Removing the air shroud Prerequisites CAUTION: Never operate your system with the air shroud removed. The system may get overheated quickly, resulting in shutdown of the system and loss of data. 1. Follow the safety guidelines listed in the Safety instructions. 2. Follow the procedure listed in Before working inside your system. Steps Holding the air shroud at both ends, lift the air shroud out of the system. Figure 17. Removing the air shroud Next steps 1. Replace the air shroud. Installing the air shroud Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. 2. Follow the procedure listed in Before working inside your system. Steps 1. Align the slot on the air shroud with the tabs on the chassis wall. 2. Lower the air shroud into the system until it is firmly seated. Installing and removing system components 29
![](/manual_guide/products/dell-poweredge-mx750c-emc-installation-service-manual-ea74fc2/29.png)