Dell PowerEdge MX750c EMC Installation and Service Manual - Page 27
Installing the sled cover, Next steps, Prerequisites, Steps
![]() |
View all Dell PowerEdge MX750c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Figure 15. Removing the sled cover Next steps 1. Replace the sled cover. Installing the sled cover Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. 2. Ensure that all internal cables are connected and routed properly, and no tools or extra parts are left inside the system. Steps 1. Align the tabs on the system cover with the guide slots on the system. 2. Slide the cover towards the front of the system until it locks in to place. Installing and removing system components 27
![](/manual_guide/products/dell-poweredge-mx750c-emc-installation-service-manual-ea74fc2/27.png)
Figure 15. Removing the sled cover
Next steps
1.
Replace the sled cover
.
Installing the sled cover
Prerequisites
1.
Follow the safety guidelines listed in the
Safety instructions
.
2.
Ensure that all internal cables are connected and routed properly, and no tools or extra parts are left inside the system.
Steps
1.
Align the tabs on the system cover with the guide slots on the system.
2.
Slide the cover towards the front of the system until it locks in to place.
Installing and removing system components
27