Dell PowerEdge MX750c EMC Installation and Service Manual - Page 31
Processor and memory module blank
View all Dell PowerEdge MX750c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Processor and memory module blank Removing the processor and memory module blank Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. 2. Follow the procedure listed in Before working inside your system. Steps 1. To release the processor and memory module blank from the socket, simultaneously press the ejectors on both ends of the memory module socket to fully open. 2. Lift the processor and memory module blank away from the system. NOTE: The numbers on the image do not depict the exact steps. The numbers are for representation of sequence. Figure 19. Removing the processor and memory module blank Next steps 1. Replace the processor and memory module blank. Installing the processor and memory module blank Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. 2. Follow the procedure listed in Before working inside your system. Steps 1. To install the processor and memory module blank, first align the two guide pin in bolster with the hole of the blank. Installing and removing system components 31