Dell PowerEdge MX750c EMC Installation and Service Manual - Page 80
Removing the M.2 SSD module, Installing the M.2 BOSS card
![]() |
View all Dell PowerEdge MX750c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Figure 73. Installing the M.2 BOSS card Next steps 1. Follow the procedure listed in the After working inside your system. Removing the M.2 SSD module Prerequisites 1. Follow the safety guidelines listed in the safety instructions. 2. Follow the procedure listed in the Before working inside your system. Steps 1. Using the Phillips #1 screwdriver, remove the screws that secure the M.2 SSD module to the M.2 BOSS card. 2. Pull the M.2 SSD module to remove it from the M.2 BOSS card. 80 Installing and removing system components
![](/manual_guide/products/dell-poweredge-mx750c-emc-installation-service-manual-ea74fc2/80.png)
Figure 73. Installing the M.2 BOSS card
Next steps
1.
Follow the procedure listed in the
After working inside your system
.
Removing the M.2 SSD module
Prerequisites
1.
Follow the safety guidelines listed in the
safety instructions
.
2.
Follow the procedure listed in the
Before working inside your system
.
Steps
1.
Using the Phillips #1 screwdriver, remove the screws that secure the M.2 SSD module to the M.2 BOSS card.
2.
Pull the M.2 SSD module to remove it from the M.2 BOSS card.
80
Installing and removing system components