Dell PowerEdge MX750c EMC Installation and Service Manual - Page 79
Installing the M.2 BOSS card, Removing the M.2 BOSS card
![]() |
View all Dell PowerEdge MX750c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Figure 72. Removing the M.2 BOSS card Next steps 1. Replace the M.2 BOSS card. Installing the M.2 BOSS card Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. 2. Follow the procedure listed in the Before working inside your system. Steps 1. Align the M.2 BOSS card connector with the connectors on the system board and the guide on the M.2 BOSS card with the guiding slot on the system board. 2. Press the touch point on the M.2 BOSS card firmly until it is fully seated. Installing and removing system components 79
![](/manual_guide/products/dell-poweredge-mx750c-emc-installation-service-manual-ea74fc2/79.png)
Figure 72. Removing the M.2 BOSS card
Next steps
1.
Replace the M.2 BOSS card
.
Installing the M.2 BOSS card
Prerequisites
1.
Follow the safety guidelines listed in the
Safety instructions
.
2.
Follow the procedure listed in the
Before working inside your system
.
Steps
1.
Align the M.2 BOSS card connector with the connectors on the system board and the guide on the M.2 BOSS card with the
guiding slot on the system board.
2.
Press the touch point on the M.2 BOSS card firmly until it is fully seated.
Installing and removing system components
79