Dell PowerEdge MX750c EMC Installation and Service Manual - Page 81
Installing the M.2 SSD module, Removing the M.2 SSD module
![]() |
View all Dell PowerEdge MX750c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Figure 74. Removing the M.2 SSD module Next steps 1. Replace the M.2 SSD module. Installing the M.2 SSD module Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. 2. Follow the procedure listed in the Before working inside your system. Steps 1. Align the M.2 SSD module at an angle with the M.2 BOSS card connector. 2. Insert the M.2 SSD module firmly until it is fully seated in the M.2 BOSS card connector. 3. Using the Phillips #1 screwdriver, secure the M.2 SSD module on the M.2 BOSS card. Installing and removing system components 81
![](/manual_guide/products/dell-poweredge-mx750c-emc-installation-service-manual-ea74fc2/81.png)
Figure 74. Removing the M.2 SSD module
Next steps
1.
Replace the M.2 SSD module
.
Installing the M.2 SSD module
Prerequisites
1.
Follow the safety guidelines listed in the
Safety instructions
.
2.
Follow the procedure listed in the
Before working inside your system
.
Steps
1.
Align the M.2 SSD module at an angle with the M.2 BOSS card connector.
2.
Insert the M.2 SSD module firmly until it is fully seated in the M.2 BOSS card connector.
3.
Using the Phillips #1 screwdriver, secure the M.2 SSD module on the M.2 BOSS card.
Installing and removing system components
81