Epson C831 Users Manual - Page 24
Using the Micro Adjust Function, Adjusting the tear-off position
View all Epson C831 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
GP-C830/GP-M830/GP-C831/GP-M831/GP-C832/GP-M832 User's Guide 2. Press the FF button to eject the last label form forward. Using the Micro Adjust Function The Micro Adjust function allows you to move the paper forward or backward in 0.141 mm (1/180-inch) increments so that you can make precise adjustments to the top-of-form and tear-off positions. Adjusting the tear-off position If the paper perforation is not in the desired tear-off position, you can use the Micro Adjust function to adjust the position of the perforation. Follow these steps to adjust the tear-off position. Note: Your tear-off position setting remains in effect until you change it, even if you turn off the printer. 1. Make sure the paper is at the current tear-off position. 2. Hold down the Pause button for about three seconds. The Pause light flashes and the printer enters Micro Adjust mode. 3. Press the FF D button to feed the paper forward, or press the Load/Eject U button to feed the paper backward, until the paper perforation is in the desired tear-off position. Paper Handling 24