Epson Stylus Pro 7890 User's Guide - Page 162
After you print the pattern, put the two cut pieces together and select
View all Epson Stylus Pro 7890 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
162 | Maintaining and Transporting the Printer 2. Tighten the screw using a cross-head screwdriver. Note: Reinstall the optional SpectroProofer if necessary, following the instructions that came with it. Then turn on the printer and press the OK button. 3. Align the cover, then press it in until it clicks into place. 4. Press OK to finish the replacement process. The cutter moves to home position. 5. Run the Cutter Adjustment from the Maintenance Menu on the control panel. After you print the pattern, put the two cut pieces together and select the pattern with the most precise cut between the two colors. Select the pattern number on the control panel and press OK. 162
162
162
|
Maintaining and Transporting the Printer
2.
Tighten the screw using a cross-head screwdriver.
3.
Align the cover, then press it in until it clicks into place.
4.
Press
OK
to finish the replacement process. The cutter moves to home
position.
5.
Run the Cutter Adjustment from the Maintenance Menu on the control
panel.
After you print the pattern, put the two cut pieces together and select
the pattern with the most precise cut between the two colors. Select the
pattern number on the control panel and press
OK
.
Note:
Reinstall the
optional SpectroProofer if
necessary, following the
instructions that came
with it. Then turn on the
printer and press the
OK
button.