Fujitsu 6010N Operator's Guide - Page 128
Setting the Network Printers, Network Tree
UPC - 097564307683
View all Fujitsu 6010N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
4.6.13 Setting the Network Printers Touch Panel Admin Central Tool Admin Set a printer connected to the network. The procedure for setting a network printer is as follows. 1. Check the printer driver. For more details, refer to "Checking the Printer Drivers" (page 95). 2. Set the printer properties. For more details, refer to "Setting the Printer Properties" (page 96). 3. Register the network printer. Up to 100 network printers can be registered. A network printer can be registered in one of the following ways. • Network Tree Select a network printer from the network tree. For more details, refer to "Registering a Network Printer (Network Tree)" (page 99). • Network Path Directly enter the network printer path name. For more details, refer to "Registering a Network Printer (Network Path)" (page 102). ATTENTION • Be sure to read the printer manual beforehand for information about setting a printer, adding a network printer, and other cautions. • If the drive on which the spool folder for the print server exists does not have enough free space, printing will stop. Make sure that there is enough space in the drive before printing. • Do not set a virtual printer. • If a printer connected to different print servers is to be registered as a net- work printer multiple times, the software level of the driver should be the same on each print server. If the software level of the printer driver differs, printing errors may occur. 94