Fujitsu 6010N Operator's Guide - Page 390
Checking the network operating status
UPC - 097564307683
View all Fujitsu 6010N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 390 highlights
■ Checking the network operating status Check the network status. For details about the checking procedure, refer to "4.6.17 Checking the Network Operating Status" (page 125). Check the "Network Information" screen, and follow each action described below according to the message that is shown. Network settings Action The information shown is all None valid. The information shown is not all valid. If DHCP is not used: Check that the "IP Address" setting is correct. If DHCP is used: • Check that physical network connection to the DHCP server is functioning correctly. • Check the DHCP server. The server may not be operating nor- mally, or the DHCP settings (restricted number of leases or MAC address validation) may be causing invalid IP addresses to be assigned. The information shown is valid, but pinging indicates that the network connection is not functioning normally. In "4.6.17 Checking the Network Operating Status" (page 125), change the [Link Speed/Duplex Mode] from "AutoNegotiation" to a fixed mode. If the problem persists, refer to "Failure to connect to a server using its IP address" (page 359) for further solutions. 356