Fujitsu 6010N Operator's Guide - Page 413
In Scan Settings, set the Multifeed Setup to [None]. For more details, ISO7810-compliant
UPC - 097564307683
View all Fujitsu 6010N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 413 highlights
ATTENTION Take the following precautions when scanning plastic cards (for example ID cards). • In Scan Settings, set the Multifeed Setup to [None]. For more details about Multifeed Setup, refer to "6.8.17 Multifeed Detection (Layer and Length)" (page 305). • Place one card at a time into the ADF paper chute. • Cards must be fed through the ADF in portrait mode, as in the fol- lowing figure. A siBdaeck PORTRAIT LANDSCAPE • Cards should be placed face down in the ADF paper chute. • Embossed cards should be placed with the raised lettering side down. • Cards should be of the following specifications: ISO7810-compliant, Type ID-1 cards Width × Length: 2.1in X 3.4in / 54mm X 86mm Thickness: 0.03 ± 0.003in / 0.76 ± 0.08mm Material: PVC (polyvinyl chloride) or PVCA (polyvinyl chloride acetate) • Cards that are excessively rigid may not be fed smoothly by the ADF. • Cards that have become dirty from handling should be wiped clean before scanning. Network Scanner fi-6010N Operator's Guide 379