Fujitsu 6010N Operator's Guide - Page 56
Using the Scanner Buttons
UPC - 097564307683
View all Fujitsu 6010N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
2.1 Using the Scanner Buttons 2.1.1 Using the Startup Button When the scanner is off or in standby mode, pressing the startup button will start the scanner up and display the "Login" screen. Shutdown LED Dark Press Button Operating LED Lit Login Screen Login Operation Screens Press Button(*) No operation for set period Standby LED Blinking * Other than pressing the startup button, any of the following operations will startup the scanner from standby mode. • Loading the document in the ADF paper chute. • Closing the top cover. • Pressing a keyboard key. The screen displayed after a re-startup varies according to the specified wait time for automatic logout in the following way: • If "Never" is specified for automatic logout, the operation screen is displayed. • If a setting other than "Never" is specified for automatic logout, the "Login" screen is dis- played. The idle time before standby mode entered can be changed. For details, refer to "4.5.6 Setting the Time to Standby Mode" (page 57). ATTENTION When the scanner is starting up or in standby mode, be careful to never hold the startup button down for four seconds, as this will cause the scanner to shutdown. If this happens, saved scanned data may become unusable. If the startup button is accidentally held down too long, causing the scanner to shutdown, temporally detach the AC adaptor to ensure that the power is completely off. After turning the power off, wait for at least ten seconds before turning the power back on again. To shutdown the scanner correctly, press the [Shutdown] button on the "Login" screen. 22