Fujitsu 6010N Operator's Guide - Page 52
Network Requirements, 1.4.6 Scanner Requirements for iScanner Central Admin, tered on the server
UPC - 097564307683
View all Fujitsu 6010N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
1.4.5 Network Requirements This section describes the required network conditions for the following cases. ATTENTION • Communication via an HTTP proxy is not supported. • Networks where IP addresses using NAT/NAPT are not supported. ■ If iScanner Central Admin is used The following network conditions are required. • HTTP/HTTPS communication is possible from the network scanner admin tool to the scanner • HTTP/HTTPS communication is possible from the Central Admin Server to the scanner • HTTP/HTTPS communication is possible from the scanner to the Central Admin Server • Wake-On-LAN Magic Packet routing is possible from the Central Admin Server to the scanner (when WakeOnLAN is used) ■ If iScanner Central Admin is not used The following network conditions are required. • HTTP/HTTPS communication is possible from the network scanner admin tool to the scanner 1.4.6 Scanner Requirements for iScanner Central Admin Up to 1,000 scanners can be managed with iScanner Central Admin. If 1,000 scanners are registered on the server, no more scanners can be registered as targets for central admin. If the number of scanners exceeds 1,000, multiple Central Admin Servers will be prepared. The target scanners for each server should not exceed 1,000. 18