Fujitsu 6010N Operator's Guide - Page 469
Attachment Size setting., 4.6.11 Setting the e-Mail Server SMTP
UPC - 097564307683
View all Fujitsu 6010N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 469 highlights
Code 12010006 12010100 12020001 12020002 Message Action SMTP server connection was lost while sending e-mail. Try the following: • Check that the LAN cable of the scanner and SMTP server is connected properly. • Contact a system administrator to check that then scanner IP address and SMTP server settings are correct. "8.3 Network Connection Troubleshooting" (page 354) • Contact a system administrator to check that the SMTP server is working properly. • Contact a system administrator to check the maximum e-mail size allowed by the SMTP server. Error: e-mail could not be sent. Contact a system administrator to check if sending e-mail is allowed. Scanned data size exceeded maximum size allowed for sending by fax. Try the following: • Reduce the number of pages to be scanned and send the fax in separate parts. • Select a higher compression level, and try again. "6.8.9 Compression" (page 295) If the problem persists, contact a system administrator to check the "Maximum Attachment Size" setting. "4.6.11 Setting the e-Mail Server (SMTP Server)" (page 92) Could not connect to server when sending fax. Try the following: • Check that the LAN cable of the scanner and SMTP server is connected properly. • Contact a system administrator to check that the scanner IP address, SMTP server and fax server settings are correct. "8.3 Network Connection Troubleshooting" (page 354) • Contact a system administrator to check that the SMTP and fax servers are working properly. D Network Scanner fi-6000NS Operator's Guide 435