Fujitsu 6010N Operator's Guide - Page 434
Clearing the User Data Store, Updating the Scanner's Sys, tem Software
UPC - 097564307683
View all Fujitsu 6010N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 434 highlights
Screen System Status Usage Status User Log System Log User Data Store Message Action Cannot read data from a scanner unit. If the scanner does not restart automatically, disconnect the AC cable from the scanner to turn the power off, wait for at least ten seconds, then reconnect the AC cable and try turning the power back on again. If the error status persists, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. Cannot read data from a scanner unit. If the scanner does not restart automatically, disconnect the AC cable from the scanner to turn the power off, wait for at least ten seconds, then reconnect the AC cable and try turning the power back on again. If the error status persists, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. No user logs. No action required. No system logs. No action required. Specified backup file could not be uploaded, or is not a valid user data store. Try the following: • Check if the specified backup file is correct. • Try restoring the file again. • Specified backup file may not be uploaded because of network error. Check the network status. Restoring from the specified backup file will cause the maximum number of user data stores to be exceeded. Clear the existing user data stores, and try again. Up to 1,000 users can be registered. Clear the existing user data stores, and try again. "Clearing the User Data Store" (page 142) User data could not be restored. Specified file contains unsupported data. Versions do not match between the backup device and restoring device. Update the restoring device. "4.9.3 Updating the Scanner's System Software" (page 147) 400