Fujitsu 6010N Operator's Guide - Page 373
Resetting the, Usage Counter Insert the pick roller and shaft back in the scanner.
UPC - 097564307683
View all Fujitsu 6010N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 373 highlights
7.6 Replacing Parts 7. Insert the pick roller and shaft back in the scanner. To attach the pick roller to the scanner, follow the pick roller and shaft removal procedure in reverse. 1. Rotate the left side pick roller bushing in the direction indicated by the arrow. Pick roller bushing Pick roller shaft 2. Open the tabs of the sheet guide release catch in the direction indicated by the arrow to lock the sheet guide in place. Scanner Care 8. Close the top cover. You should hear a click when it is returned to its original position. ATTENTION Be careful that the top cover does not shut on your fingers. 7 9. Attach the ADF paper chute. 10. Reset the pick roller usage counter. The usage counter must be reset by an administrator. For details, refer to "Resetting the Usage Counter" (page 129). Network Scanner fi-6010N Operator's Guide 339