Fujitsu 6010N Operator's Guide - Page 401
Other Troubleshooting, A.2 Paper Require, ments Cleaning, the ADF
UPC - 097564307683
View all Fujitsu 6010N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 401 highlights
8.4 Other Troubleshooting Problem Check item Suggestion Multifeed errors occur frequently. Do the documents satisfy the conditions given in "A.2 Paper Requirements" (page 377)? Use documents which satisfy the conditions described in "A.2 Paper Requirements" (page 377). Has the document been loaded correctly into the ADF paper chute? Riffle and realign the document stack, then load it back into the ADF paper chute. Is the document stack more than 5mm thick? Remove sheets from the stack to reduce it to a thickness of 5mm or less. Is the pad assembly dirty? Clean the pad assembly. For more details, refer to "7.2 Cleaning the ADF" (page 324). Is the pad assembly worn out? Replace the pad assembly. For more details, refer to "7.6 Replacing Parts" (page 333). Paper is not fed into the scanner. (Pick errors are frequent or document feed stops midway) Do the documents satisfy the conditions given in "A.2 Paper Requirements" (page 377)? Is the pick roller dirty? Use documents which satisfy the conditions described in "A.2 Paper Requirements" (page 377). Clean the pick roller. For more details, refer to "7.2 Cleaning the ADF" (page 324). Is the pick roller worn out? Replace the pick roller. For more details, refer to "7.6 Replacing Parts" (page 333). Is there any foreign matter in the document feed path? Clean the document feed path. Troubleshooting Scanned data is elongated. Are the feed rollers dirty? Clean the feed rollers. For more details, refer to "7.2 Cleaning the ADF" (page 324). Shadow on the leading edge of the scanned data. Are the feed rollers dirty? Clean the feed rollers. For more details, refer to "7.2 Cleaning the ADF" (page 324). Vertical line on the scanned data. Are the glass scanner windows dirty? For more details on cleaning the glass scanner windows, refer to "Chapter 7 Scanner Care" (page 321). Scanned data Has the document been loaded cor- appears skewed or rectly? Load the document correctly. 8 distorted. Quality of scanned Are the glass scanner windows dirty? Clean the glass scanner windows. data is poor. Network Scanner fi-6010N Operator's Guide 367