HP 2300n HP Business Inkjet 2300 - User Guide - Page 111

Changing networking parameters from the control panel Note The EIO (enhanced input/output) submenu appears on the I/O menu only when an HP Jetdirect print server is installed. If the printer contains an HP Jetdirect print server, you can configure basic networking parameters using the EIO menu. Network printer administrators can also use HP Web Jetadmin or the embedded Web server to configure these and other parameters remotely. The items available on the menu vary depending on the particular print server that is installed. EIO menu This menu allows you to configure the networking parameters for the printer. To check the printer's current network settings, print a Jetdirect Configuration page. See "Printing a Configuration page." Message CFG NETWORK IPX/SPX DLC/LLC TCP/IP ATALK CFG IPX/SPX Value or Submenu NO YES ON OFF Description Selects whether or not you want to use the EIO Jetdirect menu items. You must change this option to YES each time you want to use the EIO Jetdirect menu. Selects whether to enable or disable a protocol. Select OFF to disable a protocol. NO Selects whether to use the IPX/SPX menu and set YES the IPX/SPX protocol parameters. In the IPX/SPX menu, you can specify the frame type parameter used on your network. z The default is AUTO, which automatically sets and limits the frame type to the first one detected. z For Ethernet networks, frame type selections include EN_8023, EN_II, EN_8022, and EN_SNAP. z For Token Ring networks, frame type selections include TR_8022 and TR_SNAP. In the submenu for Token Ring cards, you can also specify the NetWare Source Routing parameter, which can be AUTO (default), OFF, SINGLE R, or ALL RT. ENWW A-9