HP 3500cp Service Manual - Page 113

D16. Erase EEROM The purpose of this test is to clear the EEROM. Perform the Erase EEROM test as follows: Before erasing the EEROM, it is recommended that a configuration plot is printed for setup reference because you will need to reĆconfigure the frontĆpanel settings. 1 In the Diagnostics submenu, scroll to D16 Erase EEROM" and press Enter. Diagnostics D16 Erase EEROM 2 The Yes=Enter No=Prev" message is displayed on the frontĆpanel. 3 If you DO NOT want to erase the EEROM press the Previous key. The message D1600 Cancelled" will be displayed. 4 If you want to erase the EEROM press the Enter key. While the EEROM is being erased, a row of ***" will be displayed on the frontĆpanel. 5 Once the EEROM is erased, the D1600 OK" message is displayed on the frontĆpanel. 6 If the test fails, the D1601 Fail" message is displayed on the frontĆpanel. If the test fails, Replace the Electronics Module ' page 8Ć6. Service Tests HP DesignJet CP Series Printers 4-29