HP 3500cp Service Manual - Page 17
C:\> cop0 ´b filename lp
View all HP 3500cp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
8 When the data on the Flash SIMM is erased the message Please Download Binary Code" is displayed on the frontĆpanel. 9 To download the PostScript data to the Flash SIMM follow these instructions: D If using a UNIX Workstation, type: $ cat filename > device.file Substitute filename" with the name of the file that contains the PostScript data which you downloaded from the Plotter Support WEB. Substitute device.file" with the name of your Workstation parallel device file. D If using a PC, type in MSĆDOS: C:\> copy /b filename lpt1: Substitute filename" with the name of the file that contains the PostScript data which you downloaded from the Plotter Support WEB. Substitute lpt1" with name of the parallel port that you have your Printer connected to on the PC. 10 While the PostScript data is being received by the printer, the message Receiving Binary Code" will be displayed on the frontĆpanel. THE DATA IS BEING DOWNLOADED ONTO THE FLASH SIMM AT THIS POINT. DO NOT SWITCH OFF THE PRINTER BECAUSE IT WILL DAMAGE THE FLASH SIMM. 11 When the Flash SIMM is completely programmed, the message Finished Programming / Power OFF the board" will be displayed on the frontĆpanel. 12 Switch the Printer OFF from the power switch on the back of the printer. 13 Switch the Printer ON from the power switch on the back of the printer and the Printer will start the initialization procedure. 14 When the message Status/Ready" is displayed on the frontĆpanel, check that the new PostScript revision has been correctly downloaded by using the frontĆpanel menu in Utilities / Statistics / PS rev = PostScript. The frontĆpanel should now show the new PostScript Revision of the Flash SIMM. Troubleshooting HP DesignJet CP Series Printers 1-5