HP 3500cp Service Manual - Page 44

D If the Error is related to the Refill Stepper Motor then replace the Refill Assembly ' Page 8Ć55. D If the Error is related to the Primer Stepper Motor then replace the Primer Assembly ' Page 8Ć29. D If the Error is related to the Service Station Stepper Motors then replace the Service Station Assembly ' Page 8Ć26. D If the Error is related to the Bail Stepper Motor then replace the Bail Stepper Motor Assembly ' Page 8Ć62. D Replace the Electronics Module ' page 8Ć6. Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed. System Error: Problem Description: Corrective Action: 010036 (see next page for 010036 0000XX00) ADC Test Failure in the Main PCA. Try the following: D Switch the Printer OFF from the back and then disconnect the Trailing Cable from the Electronics Module. Switch the Printer ON and see if the Error Code now changes to 010037". If the error code remains as 010036", replace the Electronics Module ' page 8Ć6. D If the Error Code changes to 010037" then try the following: S Make sure that the Trailing Cable is connected correctly. S Replace the Trailing Cable ' page 8Ć36. S Replace the Carriage Assembly ' page 8Ć42. S Replace the Electronics Module ' page 8Ć6. Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed. 2-10 HP DesignJet CP Series Printers System Error Codes