HP 3500cp Service Manual - Page 40
The Printhead Primitive Driver ASIC Test Failed., Replace the Carriage Assembly - designjet driver
View all HP 3500cp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
System Error: Problem Description: Corrective Action: 010031 The Printhead Primitive Driver ASIC Test Failed. Try the following: D Make sure that the Trailing Cable is connected correctly. D Perform the Carriage Calibration ' page 5Ć6. D Replace the Trailing Cable ' page 8Ć36. D Replace the Carriage Assembly ' page 8Ć42. D Replace the Electronics Module ' page 8Ć6. Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed. 2-6 HP DesignJet CP Series Printers System Error Codes
2-6
System Error Codes
HP DesignJet CP Series Printers
System Error:
010031
Problem Description:
The Printhead Primitive Driver ASIC Test Failed.
Corrective Action:
Try the following:
D
Make sure that the Trailing Cable is connected
correctly.
D
Perform the Carriage Calibration
'
page 5Ć6.
D
Replace the Trailing Cable
'
page 8Ć36.
D
Replace the Carriage Assembly
'
page 8Ć42.
D
Replace the Electronics Module
'
page 8Ć6.
Only replace one component at a time and
check if the error has gone before replacing
another component. Using this procedure
you will be able to determine exactly which
component failed.