HP 3500cp Service Manual - Page 49

D If the Error is related to the Elevator Sensor then replace the Elevator Assembly ' Page 8Ć52. D If the Error is related to the Service Station Sensor then replace the Service Station Assembly ' Page 8Ć26. D If the Error is related to the Media Sensor/Media Button then: The Media Button is only applicable to HP DesignJets 3500CP and 3000CP. S Make sure that the Media Sensor/Media Button is installed correctly. S Make sure that the cable for the Media Sensor/Media Button is connected correctly. S Replace the Media Sensor ' Page 8Ć78. S Replace the Media Button ' Page NO TAG. D If the Error is related to the Primer Sensor then replace the Primer Assembly ' Page 8Ć29. D Replace the Electronics Module ' page 8Ć6. Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed. System Error: Problem Description: Corrective Action: 010043 Problem with the Carriage Board. Try the following: D Make sure that the Trailing Cable is connected correctly. D Replace the Carriage Assembly ' page 8Ć42. D Replace the Electronics Module ' page 8Ć6. Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed. System Error Codes HP DesignJet CP Series Printers 2-15