HP 3500cp Service Manual - Page 93
Replacing The Line Sensor. If This Test Passes, Do Not, If This Test Passes
View all HP 3500cp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
D02. Line Sensor The purpose of this test is to verify the operation of the Line Sensor which is installed on the carriage assembly. IF POSSIBLE ALWAYS PERFORM THIS TEST BEFORE REPLACING THE LINE SENSOR. IF THIS TEST PASSES, DO NOT REPLACE THE LINE SENSOR. Perform the Line Sensor test as follows: Load GLOSSY or COATED media before performing this test. REPLACE THE LENS COVER BEFORE YOU PERFORM THIS TEST IN ORDER TO PREVENT ANY AEROSOL PROBLEMS. 1 In the Diagnostics submenu, scroll to D02 Line Sensor" and press Enter. Diagnostics D02 Line Sensor 2 If media is not loaded the test will stop and the message Load Media" will be displayed on the frontĆpanel. Load media in order to continue the test. 3 The message Move Carriage" will be displayed on the frontĆpanel. Use the following keys to move the carriage left and right over the loaded media. D Cancel Ć Move the carriage to the left. D Form Feed and Cut Ć Move the carriage to the right. 4 Make sure that the window is closed and then press Enter when the line sensor of the carriage is placed over the media. 5 While the test is being performed, a row of ***" will be displayed on the frontĆpanel. 6 If the test passes, a message similar to the following is displayed on the frontĆpanel. Green OK V: 8.0 Blue OK V: 11.0 T: 0 IF THIS TEST PASSES, DO NOT REPLACE THE LINE SENSOR. 7 Press Previous when you have completed the test. The D0200 Done" message is displayed on the frontĆpanel if the test exits correctly. The test is continued on the next page. Service Tests HP DesignJet CP Series Printers 4-9