HP 4650n HP Color LaserJet 4650 series printer - User Guide - Page 213
Printer will not duplex or duplexes incorrectly, Output is curled or wrinkled continued
UPC - 829160046532
View all HP 4650n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 213 highlights
Output is curled or wrinkled (continued) Cause The specific media type was not configured for the tray or selected in the software. Solution Configure the software for the media (see the software documentation). Configure the tray for the media, see Configuring input trays. Printer will not duplex or duplexes incorrectly Cause Solution You are trying to duplex on unsupported media. Verify that the media is supported for duplex printing. See Supported media weights and sizes. The printer driver is not set up for duplex printing. Set up the printer driver to enable duplex printing. The first page is printing on the back of preprinted forms or letterhead. Load preprinted forms and letterhead in Tray 1 with the letterhead or printed side up and the bottom of the page feeding into the printer. For Tray 2, Tray 3, or Tray 4, load these media printed side down with the top of the page toward the back of the printer. ENWW Media-handling problems 199