HP 6125XLG R2306-HP 6125XLG Blade Switch FCoE Configuration Guide - Page 109
Create interface VFC 2, and con it to operate in E mode
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
system-view [SwitchC] system-working-mode advance Do you want to change the system working mode? [Y/N]:y The system working mode is changed, please save the configuration and reboot the system to make it effective. # Configure Switch C to operate in FCF mode, and enable the fabric configuration function in VSAN 1. system-view [SwitchC] fcoe-mode fcf [SwitchC] vsan 1 [SwitchC-vsan1] domain configure enable # Configure the domain ID as 3. [SwitchC-vsan1] domain-id 3 static Non-disruptive reconfiguration or isolating the switch may be performed. Continu e? [Y/N]:y # Disable FSPF globally. [SwitchC-vsan1] undo fspf enable [SwitchC-vsan1] quit # Create interface VFC 2, and configure it to operate in E mode. [SwitchC] interface vfc 2 [SwitchC-Vfc2] fc mode e # Bind interface VFC 2 to interface Ten-GigabitEthernet 1/1/6, and assign it to VSAN 1 as a trunk port. [SwitchC-Vfc2] bind interface ten-gigabitethernet 1/1/6 [SwitchC-Vfc2] port trunk vsan 1 [SwitchC-Vfc2] quit # Assign interface Ten-GigabitEthernet 1/1/6 to VLAN 10 as a trunk port. [SwitchC] interface ten-gigabitethernet 1/1/6 [SwitchC-Ten-GigabitEthernet1/1/6] port link-type trunk [SwitchC-Ten-GigabitEthernet1/1/6] port trunk permit vlan 10 [SwitchC-Ten-GigabitEthernet1/1/6] quit # Enable FCoE for VLAN 10 and map VLAN 10 to VSAN 1. [SwitchC] vlan 10 [SwitchC-vlan10] fcoe enable vsan 1 [SwitchC-vlan10] quit 4. On Switch A, use the fcping command to ping Switch C and check whether Switch C is reachable. [SwitchA] fcping fcid fffc03 vsan 1 FCPING fcid 0xfffc03: 128 data bytes, press CTRL_C to break. Request time out Request time out Request time out Request time out Request time out --- 0xfffc03 fcping statistics --5 packet(s) transmitted 0 packet(s) received 103