HP 6125XLG R2306-HP 6125XLG Blade Switch FCoE Configuration Guide - Page 60
Configuring FC routing and forwarding, Overview, Routing table and FIB table, Routing table contents
![]() |
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Configuring FC routing and forwarding Overview Routing and forwarding in an FC SAN is achieved through FCF switches. When an FCF switch receives a packet, an FCF switch selects an optimal route based on the destination address and forwards the packet to the next FCF switch in the path until the packet reaches the last FCF switch, which forwards the packet to the destination node. Routing provides the path information that guides the forwarding of packets. Routing table and FIB table An FCF switch determines the best routes by using its routing table and sends those routes to the FIB table, which guides packet forwarding. An FCF switch maintains one routing table and one FIB table for each VSAN. Routing table contents The routing table saves the routes discovered by various routing protocols. Routes in a routing table include the following types: • Direct routes-Routes discovered by link layer protocols • Static routes-Routes manually configured by the administrator • FSPF routes-Routes discovered by the Fabric Shortest Path First (FSPF) protocol To display summary information about a routing table, use the display fc routing-table command as follows: display fc routing-table vsan 1 Routing Table: VSAN 1 Destinations : 6 Routes : 6 Destination/mask 0x020000/8 0x120000/8 0xfffc01/24 0xfffffa/24 0xfffffc/24 0xfffffd/24 ... Protocol FSPF STATIC DIRECT DIRECT DIRECT DIRECT Preference 20 10 0 0 0 0 Cost 265 0 0 0 0 0 Interface Vfc1 Vfc2 InLoop0 InLoop0 InLoop0 InLoop0 A route entry includes the following key items: • Destination-Destination address of an FC frame. • mask-Together with the destination address, specifies the destination node or the domain address of an FCF switch. A logical AND operation between the destination address and the network mask yields the domain address of the destination node or FCF switch. For example, if the destination address is 0x010001 and the mask is 0xFF0000, the domain address of the destination node or 54
![](/manual_guide/products/hewlettpackard-6125xlg-r2306hp-6125xlg-blade-switch-fcoe-configuration-guide-eb2d1e7/60.png)