HP 6125XLG R2306-HP 6125XLG Blade Switch FCoE Configuration Guide - Page 110
The output shows that Switch A can reach Switch B, but Switch B cannot reach Switch C. Therefore
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
100.00% packet loss The output shows that Switch A cannot reach Switch C. 5. Use the fctracert command to identify the faulty node. [SwitchA] fctracert fcid fffc03 vsan 1 Route present for: 0xfffc03, press CTRL_C to break 20:00:00:0b:46:00:02:82(0xfffc01) 20:00:00:05:30:00:18:db(0xfffc02) Fctracert uncompleted: no route to destination port. The output shows that Switch A can reach Switch B, but Switch B cannot reach Switch C. Therefore, you can use the display fc routing-table command on Switch B to see whether there is a route to Switch C. 104
104
100.00% packet loss
The output shows that Switch A cannot reach Switch C.
5.
Use the
fctracert
command to identify the faulty node.
[SwitchA] fctracert fcid fffc03 vsan 1
Route present for: 0xfffc03, press CTRL_C to break
20:00:00:0b:46:00:02:82(0xfffc01)
20:00:00:05:30:00:18:db(0xfffc02)
Fctracert uncompleted: no route to destination port.
The output shows that Switch A can reach Switch B, but Switch B cannot reach Switch C. Therefore,
you can use the
display fc routing-table
command on Switch B to see whether there is a route to
Switch C.