HP 6125XLG R2306-HP 6125XLG Blade Switch FCoE Configuration Guide - Page 57
the two interfaces to trust the 802.1p priority carried in packets., Create interface VFC 1
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
[SwitchA-maptbl-out-dot1p-lp] import 3 export 3 [SwitchA-maptbl-out-dot1p-lp] quit # Enable byte-count WRR on Ten-GigabitEthernet 1/1/5 and Ten-GigabitEthernet 1/1/6, and configure queue 3 to use SP queuing. [SwitchA] interface ten-gigabitethernet 1/1/5 [SwitchA-Ten-GigabitEthernet1/1/5] qos wrr byte-count [SwitchA-Ten-GigabitEthernet1/1/5] qos wrr 3 group sp [SwitchA-Ten-GigabitEthernet1/1/5] quit [SwitchA] interface ten-gigabitethernet 1/1/6 [SwitchA-Ten-GigabitEthernet1/1/6] qos wrr byte-count [SwitchA-Ten-GigabitEthernet1/1/6] qos wrr 3 group sp [SwitchA-Ten-GigabitEthernet1/1/6] quit # Enable Ten-GigabitEthernet 1/1/5 and Ten-GigabitEthernet 1/1/6 to automatically negotiate with their peers to decide whether to enable PFC, enable PFC for 802.1p priority 3, and configure the two interfaces to trust the 802.1p priority carried in packets. [SwitchA] interface ten-gigabitethernet 1/1/5 [SwitchA-Ten-GigabitEthernet1/1/5] priority-flow-control auto [SwitchA-Ten-GigabitEthernet1/1/5] priority-flow-control no-drop dot1p 3 [SwitchA-Ten-GigabitEthernet1/1/5] qos trust dot1p [SwitchA-Ten-GigabitEthernet1/1/5] quit [SwitchA] interface ten-gigabitethernet 1/1/6 [SwitchA-Ten-GigabitEthernet1/1/6] priority-flow-control auto [SwitchA-Ten-GigabitEthernet1/1/6] priority-flow-control no-drop dot1p 3 [SwitchA-Ten-GigabitEthernet1/1/6] qos trust dot1p [SwitchA-Ten-GigabitEthernet1/1/6] quit # Create interface VFC 1, and configure it to operate in F mode. [SwitchA] interface vfc 1 [SwitchA-Vfc1] fc mode f # Bind interface VFC 1 to interface Ten-GigabitEthernet 1/1/5, and assign it to VSAN 10 as a trunk port. [SwitchA-Vfc1] bind interface ten-gigabitethernet 1/1/5 [SwitchA-Vfc1] port trunk vsan 10 [SwitchA-Vfc1] quit # Assign interface Ten-GigabitEthernet 1/1/5 to VLAN 10 as a trunk port. [SwitchA] interface ten-gigabitethernet 1/1/5 [SwitchA-Ten-GigabitEthernet1/1/5] port link-type trunk [SwitchA-Ten-GigabitEthernet1/1/5] port trunk permit vlan 10 [SwitchA-Ten-GigabitEthernet1/1/5] quit # Create interface VFC 2, and configure it to operate in F mode. [SwitchA] interface vfc 2 [SwitchA-Vfc2] fc mode f # Bind interface VFC 2 to interface Ten-GigabitEthernet 1/1/6, and assign it to VSAN 20 as a trunk port. [SwitchA-Vfc2] bind interface ten-gigabitethernet 1/1/6 [SwitchA-Vfc2] port trunk vsan 20 [SwitchA-Vfc2] quit # Assign interface Ten-GigabitEthernet 1/1/6 to VLAN 20 as a trunk port. 51