HP 6125XLG R2306-HP 6125XLG Blade Switch FCoE Configuration Guide - Page 88
Deleting the zone database, Displaying and maintaining FC zones, FC zone configuration example,
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Deleting the zone database You can delete the zone database for the specified VSAN, including all zone sets, zones, and zone aliases, but not the active zone set. To delete the zone database: Step 1. Enter system view. 2. Enter VSAN view. 3. Delete the zone database. Command system-view vsan vsan-id delete zone database all Displaying and maintaining FC zones Execute display commands in any view. Task Command Display zone alias information. display zone-alias [ [ name zone-alias-name ] vsan vsan-id ] Display zone information. display zone [ [ name zone-name ] vsan vsan-id ] Display zone set information. display zoneset [ [ name zoneset-name ] vsan vsan-id ] Display information about the active zone set. display zoneset active [ vsan vsan-id ] Display information about a zone member (including the zone and zone alias to which the zone member belongs and the zone to which the zone alias belongs). display zone member { fcid fcid | pwwn pwwn | zone-alias zone-alias-name } [ vsan vsan-id ] Display the running status and configuration of an FC zone. display zone status [ vsan vsan-id ] FC zone configuration example Network requirements As shown in Figure 23, all nodes have registered with the switches. Access control is specified for VSAN 1 as follows: • Server A does not access any disk but might need to subsequently. • Server B can access Disks A, B, and C. • Server C can access Disks B and C. • Servers cannot access each other. 82