HP 6125XLG R2306-HP 6125XLG Blade Switch FCoE Configuration Guide - Page 25
Enable FCoE for VLAN 20 and map VLAN 20 to VSAN 10., Con Switch B
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
# Enable interface Ten-GigabitEthernet 1/1/5 to automatically negotiate with its peer to decide whether to enable PFC, enable PFC for 802.1p priority 3, and configure Ten-GigabitEthernet 1/1/5 to trust the 802.1p priority carried in packets. [SwitchA-Ten-GigabitEthernet1/1/5] priority-flow-control auto [SwitchA-Ten-GigabitEthernet1/1/5] priority-flow-control no-drop dot1p 3 [SwitchA-Ten-GigabitEthernet1/1/5] qos trust dot1p [SwitchA-Ten-GigabitEthernet1/1/5] quit # Create interface VFC 1, bind it to interface Ten-GigabitEthernet 1/1/5, and assign it to VSAN 10 as a trunk port. [SwitchA] interface vfc 1 [SwitchA-Vfc1] bind interface ten-gigabitethernet 1/1/5 [SwitchA-Vfc1] port trunk vsan 10 [SwitchA-Vfc1] quit # Create interface VFC 2, and configure it to operate in E mode. [SwitchA] interface vfc 2 [SwitchA-Vfc2] fc mode e # Bind interface VFC 2 to interface Ten-GigabitEthernet 1/1/6, and assign it to VSAN 10 as a trunk port. [SwitchA-Vfc2] bind interface ten-gigabitethernet 1/1/6 [SwitchA-Vfc2] port trunk vsan 10 [SwitchA-Vfc2] quit # Assign interface Ten-GigabitEthernet 1/1/5 to VLAN 20 as a trunk port. [SwitchA] interface ten-gigabitethernet 1/1/5 [SwitchA-Ten-GigabitEthernet1/1/5] port link-type trunk [SwitchA-Ten-GigabitEthernet1/1/5] port trunk permit vlan 20 [SwitchA-Ten-GigabitEthernet1/1/5] quit # Assign interface Ten-GigabitEthernet 1/1/6 to VLAN 20 as a trunk port. [SwitchA] interface ten-gigabitethernet 1/1/6 [SwitchA-Ten-GigabitEthernet1/1/6] port link-type trunk [SwitchA-Ten-GigabitEthernet1/1/6] port trunk permit vlan 20 [SwitchA-Ten-GigabitEthernet1/1/6] quit # Enable FCoE for VLAN 20 and map VLAN 20 to VSAN 10. [SwitchA] vlan 20 [SwitchA-vlan20] fcoe enable vsan 10 2. Configure Switch B: # Configure Switch B to operate in advanced mode, save the configuration, and reboot Switch B. (Skip this step if the switch is operating in advanced mode.) system-view [SwitchB] system-working-mode advance Do you want to change the system working mode? [Y/N]:y The system working mode is changed, please save the configuration and reboot the system to make it effective. # Configure Switch B to operate in FCF mode, and create VSAN 10. system-view [SwitchB] fcoe-mode fcf [SwitchB] vsan 10 [SwitchB-vsan10] quit 19