HP 6125XLG R2306-HP 6125XLG Blade Switch FCoE Configuration Guide - Page 26
Bind interface VFC 2 to interface Ten-GigabitEthernet 1/1/6, and assign it to VSAN 10 as
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
# Create interface VFC 2, and configure it to operate in E mode. [SwitchB] interface vfc 2 [SwitchB-Vfc2] fc mode e # Bind interface VFC 2 to interface Ten-GigabitEthernet 1/1/6, and assign it to VSAN 10 as a trunk port. [SwitchB-Vfc2] bind interface ten-gigabitethernet 1/1/6 [SwitchB-Vfc2] port trunk vsan 10 [SwitchB-Vfc2] quit # Assign interface Ten-GigabitEthernet 1/1/6 to VLAN 20 as a trunk port. [SwitchB] interface ten-gigabitethernet 1/1/6 [SwitchB-Ten-GigabitEthernet1/1/6] port link-type trunk [SwitchB-Ten-GigabitEthernet1/1/6] port trunk permit vlan 20 [SwitchB-Ten-GigabitEthernet1/1/6] quit # Enable FCoE for VLAN 20 and map VLAN 20 to VSAN 10. [SwitchB] vlan 20 [SwitchB-vlan20] fcoe enable vsan 10 20
20
# Create interface VFC 2, and configure it to operate in E mode.
[SwitchB] interface vfc 2
[SwitchB-Vfc2] fc mode e
# Bind interface VFC 2 to interface Ten-GigabitEthernet 1/1/6, and assign it to VSAN 10 as a
trunk port.
[SwitchB-Vfc2] bind interface ten-gigabitethernet 1/1/6
[SwitchB-Vfc2] port trunk vsan 10
[SwitchB-Vfc2] quit
# Assign interface Ten-GigabitEthernet 1/1/6 to VLAN 20 as a trunk port.
[SwitchB] interface ten-gigabitethernet 1/1/6
[SwitchB-Ten-GigabitEthernet1/1/6] port link-type trunk
[SwitchB-Ten-GigabitEthernet1/1/6] port trunk permit vlan 20
[SwitchB-Ten-GigabitEthernet1/1/6] quit
# Enable FCoE for VLAN 20 and map VLAN 20 to VSAN 10.
[SwitchB] vlan 20
[SwitchB-vlan20] fcoe enable vsan 10