HP 6125XLG R2306-HP 6125XLG Blade Switch FCoE Configuration Guide - Page 45
Con Switch B, Con Switch B to operate in advanced mode, save the configuration
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
[SwitchA] interface vfc 2 [SwitchA-Vfc2] fc mode e # Bind interface VFC 2 to interface Ten-GigabitEthernet 1/1/6, and assign it to VSAN 1 as a trunk port. [SwitchA-Vfc2] bind interface ten-gigabitethernet 1/1/6 [SwitchA-Vfc2] port trunk vsan 1 [SwitchA-Vfc2] quit # Assign interface Ten-GigabitEthernet 1/1/6 to VLAN 10 as a trunk port. [SwitchA] interface ten-gigabitethernet 1/1/6 [SwitchA-Ten-GigabitEthernet1/1/6] port link-type trunk [SwitchA-Ten-GigabitEthernet1/1/6] port trunk permit vlan 10 [SwitchA-Ten-GigabitEthernet1/1/6] quit # Enable FCoE for VLAN 10 and map VLAN 10 to VSAN 1. [SwitchA] vlan 10 [SwitchA-vlan10] fcoe enable vsan 1 [SwitchA-vlan10] quit 2. Configure Switch B: # Configure Switch B to operate in advanced mode, save the configuration, and reboot Switch B. (Skip this step if the switch is operating in advanced mode.) system-view [SwitchB] system-working-mode advance Do you want to change the system working mode? [Y/N]:y The system working mode is changed, please save the configuration and reboot the system to make it effective. # Configure Switch B to operate in FCF mode, and enable the fabric configuration function in VSAN 1 (optional, because this function is enabled by default). system-view [SwitchB] fcoe-mode fcf [SwitchB] vsan 1 [SwitchB-vsan1] domain configure enable # Set the switch priority to 1, so that Switch B can be selected as the principal switch. [SwitchB-vsan1] priority 1 [SwitchB-vsan1] quit # Create interface VFC 1, and configure it to operate in E mode. [SwitchB] interface vfc 1 [SwitchB-Vfc1] fc mode e # Bind interface VFC 1 to interface Ten-GigabitEthernet 1/1/5, and assign it to VSAN 1 as a trunk port. [SwitchB-Vfc1] bind interface ten-gigabitethernet 1/1/5 [SwitchB-Vfc1] port trunk vsan 1 [SwitchB-Vfc1] quit # Assign interface Ten-GigabitEthernet 1/1/5 to VLAN 10 as a trunk port. [SwitchB] interface ten-gigabitethernet 1/1/5 [SwitchB-Ten-GigabitEthernet1/1/5] port link-type trunk [SwitchB-Ten-GigabitEthernet1/1/5] port trunk permit vlan 10 [SwitchB-Ten-GigabitEthernet1/1/5] quit 39