HP 6125XLG R2306-HP 6125XLG Blade Switch FCoE Configuration Guide - Page 74
Enable FCoE for VLAN 10 and map VLAN 10 to VSAN 2., Enable FSPF for interface VFC 1.
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
# Configure Switch A to operate in advanced mode, save the configuration, and reboot Switch A. (Skip this step if the switch is operating in advanced mode.) system-view [SwitchA] system-working-mode advance Do you want to change the system working mode? [Y/N]:y The system working mode is changed, please save the configuration and reboot the system to make it effective. # Configure Switch A to operate in FCF mode. Enable the fabric configuration function in VSAN 2. system-view [SwitchA] fcoe-mode fcf [SwitchA] vsan 2 [SwitchA-vsan2] domain configure enable # Configure the domain ID as 1. [SwitchA-vsan2] domain-id 1 static Non-disruptive reconfiguration or isolating the switch may be performed. Continu e? [Y/N]:y # Enable FSPF globally. [SwitchA-vsan2] fspf enable [SwitchA-vsan2] quit # Create interface VFC 1, and configure it to operate in E mode. [SwitchA] interface vfc 1 [SwitchA-Vfc1] fc mode e # Bind VFC 1 to interface Ten-GigabitEthernet 1/1/5, and assign it to VSAN 2 as a trunk port. [SwitchA-Vfc1] bind interface ten-gigabitethernet 1/1/5 [SwitchA-Vfc1] port trunk vsan 2 [SwitchA-Vfc1] quit # Assign interface Ten-GigabitEthernet 1/1/5 to VLAN 10 as a trunk port. [SwitchA] interface ten-gigabitethernet 1/1/5 [SwitchA-Ten-GigabitEthernet1/1/5] port link-type trunk [SwitchA-Ten-GigabitEthernet1/1/5] port trunk permit vlan 10 [SwitchA-Ten-GigabitEthernet1/1/5] quit # Enable FCoE for VLAN 10 and map VLAN 10 to VSAN 2. [SwitchA] vlan 10 [SwitchA-vlan10] fcoe enable vsan 2 [SwitchA-vlan10] quit # Enable FSPF for interface VFC 1. [SwitchA] interface vfc 1 [SwitchA-Vfc1] undo fspf silent vsan 2 [SwitchA-Vfc1] quit 2. Configure Switch B: # Configure Switch B to operate in advanced mode, save the configuration, and reboot Switch B. (Skip this step if the switch is operating in advanced mode.) system-view [SwitchB] system-working-mode advance Do you want to change the system working mode? [Y/N]:y 68