HP 6125XLG R2306-HP 6125XLG Blade Switch FCoE Configuration Guide - Page 85
Configuring zone sets, Configuring the default zone policy, Configuring zone distribution and merge
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Step 3. Create a zone and enter its view. 4. Add a member to the zone. Command zone name zone-name member { fcid fcid | pwwn pwwn | zone-alias zone-alias-name } Remarks If the zone has been created, enter its view directly. By default, no member exists in a zone. Configuring zone sets You can configure a maximum of 128 zone sets for all VSANs on a switch. To configure a zone set: Step 1. Enter system view. 2. Enter VSAN view. 3. Create a zone set and enter its view. 4. Add a zone to the zone set. Command system-view vsan vsan-id zoneset name zoneset-name member zone-name Remarks N/A N/A If the zone set has been created, enter its view directly. By default, no zone exists in a zone set. Configuring the default zone policy Step 1. Enter system view. 2. Enter VSAN view. 3. Permit traffic between default zone members. 4. Deny traffic between default zone members. Command system-view vsan vsan-id zone default-zone permit undo zone default-zone permit Remarks N/A N/A Use one of the commands. By default, default zone members are not permitted to access each other. Configuring zone distribution and merge types Complete distribution (or merge) distributes (or merges) both the active zone set and zone database. Incomplete distribution (or merge) distributes (or merges) only the active zone set. The configured distribution type applies to distribution operations triggered by the zoneset activate command instead of the zoneset distribute command. The configured merge type applies to all merge operations. To configure zone distribution and merge types: Step 1. Enter system view. Command system-view Remarks N/A 79