HP 6125XLG R2306-HP 6125XLG Blade Switch FCoE Configuration Guide - Page 71
Assign interface Ten-GigabitEthernet 1/1/6 to VLAN 10 as a trunk port
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
[SwitchB-Vfc1] bind interface ten-gigabitethernet 1/1/5 [SwitchB-Vfc1] port trunk vsan 1 [SwitchB-Vfc1] quit # Assign interface Ten-GigabitEthernet 1/1/5 to VLAN 10 as a trunk port. [SwitchB] interface ten-gigabitethernet 1/1/5 [SwitchB-Ten-GigabitEthernet1/1/5] port link-type trunk [SwitchB-Ten-GigabitEthernet1/1/5] port trunk permit vlan 10 [SwitchB-Ten-GigabitEthernet1/1/5] quit # Create interface VFC 2, and configure it to operate in E mode. [SwitchB] interface vfc 2 [SwitchB-Vfc2] fc mode e # Bind interface VFC 2 to interface Ten-GigabitEthernet 1/1/6, and assign it to VSAN 1 as a trunk port. [SwitchB-Vfc2] bind interface ten-gigabitethernet 1/1/6 [SwitchB-Vfc2] port trunk vsan 1 [SwitchB-Vfc2] quit # Assign interface Ten-GigabitEthernet 1/1/6 to VLAN 10 as a trunk port. [SwitchB] interface ten-gigabitethernet 1/1/6 [SwitchB-Ten-GigabitEthernet1/1/6] port link-type trunk [SwitchB-Ten-GigabitEthernet1/1/6] port trunk permit vlan 10 [SwitchB-Ten-GigabitEthernet1/1/6] quit # Enable FCoE for VLAN 10 and bind VLAN 10 to VSAN 1. [SwitchB] vlan 10 [SwitchB-vlan10] fcoe enable vsan 1 [SwitchB-vlan10] quit # Configure two static routes. [SwitchB] vsan 1 [SwitchB-vsan1] fc route-static 010000 8 vfc 1 [SwitchB-vsan1] fc route-static 030000 8 vfc 2 [SwitchB-vsan1] quit 3. Configure Switch C: # Configure Switch C to operate in advanced mode, save the configuration, and reboot Switch C. (Skip this step if the switch is operating in advanced mode.) system-view [SwitchC] system-working-mode advance Do you want to change the system working mode? [Y/N]:y The system working mode is changed, please save the configuration and reboot the system to make it effective. # Configure Switch A to operate in FCF mode. Enable the fabric configuration function in VSAN 1. system-view [SwitchA] fcoe-mode fcf [SwitchA] vsan 1 [SwitchA-vsan1] domain configure enable # Configure the domain ID as 3. [SwitchC-vsan1] domain-id 3 static 65