HP Blackbird 002-21A HP Blackbird Gaming System - Getting Started Guide - Page 35
Connecting digital audio
View all HP Blackbird 002-21A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
6 Turn on the receiver/amplifier. 7 Select the receiver/amplifier input to which the Y adapter cables are connected. 8 Turn on the computer. 9 After the audio system is connected to the computer, configure the audio software for sound output for your computer model. See "Configuring Speaker and Sound Options." Connecting digital audio (Select models only) If you have a audio card and you are connecting your home stereo AV receiver via digital out, connect the 3.5 mm (1/8-inch) stereo plug to the Digital Audio Out connector on the audio card. Connect the red RCA stereo plug on the 3.5 mm (1/8-inch) Y adapter cable to the AV receiver's digital input connector on the AV receiver. If the red RCA stereo plug does not work, try the white stereo plug. Only one of the connectors is needed. To connect digital audio, your computer must include a Digital Audio Out connector on either the audio card or the back panel. You must connect multichannel speaker outputs if you connect the digital output. To connect digital audio speakers: 1 Turn off the computer. 2 Connect the orange Digital Audio Out connector on the back panel of your computer to the digital input (S/PDIF) on the digital speakers or a digital audio system. 3 Turn on the computer. NOTE: Always turn on the computer before the speaker system. 4 Connect the speaker system to the power. 5 Turn on the speaker system. 6 After the speakers are connected to the computer, configure the audio software for sound output for your computer model. See "Configuring Speaker and Sound Options." Audio card with digital output and type 3 connectors: See "Configuring speakers with Realtek HD Audio Manager." Follow the instructions to enable digital audio output. Audio card with digital output and type 6 connectors: See "Configuring speakers with Realtek HD Audio Manager." By default, digital audio output is already enabled. Audio card: Follow the instructions to enable digital audio output. Connecting Speakers or Microphone 27