HP Deskjet F2200 Full User Guide - Page 130
The printout is blank, Solution 2: Clean the scanner glass, The printout appears enlarged on
View all HP Deskjet F2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Troubleshooting If this did not solve the issue, try the next solution. Solution 2: Clean the scanner glass Solution: Clean the scanner glass and make sure that there are no foreign materials adhering to it. For more information, see Clean the glass. Cause: The scanner glass was dirty, causing the product to include an area in the copy that was larger than the document. The printout appears enlarged on the page Solution: Ensure that your Copy settings are chosen correctly. If the problem persists, debris might be stuck on the glass or on the back of the document lid. This can cause the product to detect only a portion of the image. Turn off the product, unplug the power cord, and use a soft cloth to wipe the glass and the back of the document lid. For more information, see: • Clean the lid backing • Clean the glass Cause: The product detected only a portion of the image due to dust or debris on the glass. The printout is blank Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved. • Solution 1: Place the original correctly on the glass • Solution 2: Check the ink levels in the print cartridges Solution 1: Place the original correctly on the glass Solution: Place your original with the side you want to copy or scan face down on the left front corner of the glass. Copy troubleshooting 127