HP Deskjet F2200 Full User Guide - Page 178
Out of paper, Solution, Cause, To check the paper in the input tray
View all HP Deskjet F2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
Troubleshooting Out of paper Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved. • Solution 1: Replace the rear door of the product • Solution 2: Check the paper type and the print settings • Solution 3: Clean the rollers • Solution 4: Contact HP support Solution 1: Replace the rear door of the product Solution: If you removed the rear door to clear a paper jam, replace it. Gently push the door forward until it snaps into place. Cause: The rear door was removed from the product. If this did not solve the issue, try the next solution. Solution 2: Check the paper type and the print settings Solution: Check the paper loaded in the input tray and the print settings. To check the paper in the input tray 1. Remove the stack of paper from the input tray and verify that all the paper in the input tray is the same size and type. 2. Replace any paper that is ripped, dusty, wrinkled, or bent. If the paper is curled, uncurl the paper by gently bending it in the opposite direction of the curl or replace the paper. NOTE: Use plain paper in the product until the issue is resolved. 3. Tap the stack of paper on a flat surface to align the edges. 4. Verify that the stack of paper contains between 10 and 25 sheets of paper. Errors 175